Return to Home Page International Series-Chassis Mount  
International Series Chassis Mount Power Transformers
 
115/230V
Dual Primaries		 Secondary RMS Rating


    Superior Design

  • Dual secondaries allow for output voltages ranging from 5.0 VAC to 230VAC at 6 VA.
  • Standard 0.187" quick-connect terminals.
  • Shrouded primaries/three flange bobbin design.
  • No electrostatic shield required.
  • 4500 VRMS Hipot (primary to secondary)
  • Bobbin and shroud material rated UL94V0.

    100% Final Tested

  • Every single transformer is tested on automated panels for induced voltage (shorted turns), exciting current, open circuit voltage (turns ratio), polarity (phasing) and dielectric strength.
Approvals:
UL Logo EN 60950
TUV Tested to:
UL 1585 (Class II and III)
UL 60950
UL 2601/EN 60601 - Construction


Electrical and Dimensional Drawings

Fuse Types/Values Used for Safety Agency Component Recognition


VA Part Number Parallel Series  
6.0 SPWC-4500 5V @ 1.2A 10V CT @ 600mA
SPWC-4501 6.3V @ 1.0A 12.6V CT @ 500mA
SPWC-4502 8V @ 800mA 16V CT @ 400mA
SPWC-4503 10V @ 600mA 20V CT @ 300mA
SPWC-4504 12V @ 500mA 24V CT @ 250mA
SPWC-4505 14V @ 400mA 28V CT @ 200mA
SPWC-4506 18V @ 340mA 36V CT @ 170mA
SPWC-4507 24V @ 250mA 48V CT @ 125mA
SPWC-4508 28V @ 220mA 56V CT @ 110mA
SPWC-4509* 60V @ 100mA 120V CT @ 50mA
SPWC-4510* 115V @ 52mA 230V CT @ 26mA
Note: Primary and secondary windings are designed to be used as one primary and
one secondary winding with either parallel or series connection only.

* Voltage rating cannot be approved under UL 1585

Contact Us
Fast Quote
Catalog Request
Advanced Search
webmaster@premmag.com