Shopping Cart 0 Item(s) ($0.00)

Power Transformers -
International Standard Profile PC Mount -
SPW-3630 Series - 35 VA

  • Shrouded primaries/three flange bobbin design
  • Bobbin and shroud material rated UL94V0
  • Anchor, insulating and crossover tapes, and shrouded primaries
  • No electrostatic shield required
  • Two distinct, separate windings for each primary and secondary assure excellent HIPOT capability between these windings
  • 4500 VRMS Hipot Pri - Sec
  • Immersed in 100% solids epoxy resin to withstand most aqueous and solvent cleaning systems

  • 100% Final Tested

  • Every single transformer is tested on automated panels for induced voltage (shorted turns), exciting current, open circuit voltage (turns ratio), polarity (phasing) and dielectric strength.
  • Class F Insulation System
115/230V Dual Primaries 50/60hz
Drawings Electrical and Dimensional Drawings
Product Name VA Series Parallel
SPW-3630
35VA 10 Vct @ 3.5 A 5 V @ 7.0 A
SPW-3631
35VA 12.6 Vct @ 2.80 A 6.3 V @ 5.60 A
SPW-3632
35VA 16 Vct @ 2.20 A 8 V @ 4.40 A
SPW-3633
35VA 20 Vct @ 1.75 A 10 V @ 3.5 A
SPW-3634
35VA 24 Vct @ 1.46 A 12 V @ 2.92 A
SPW-3635
35VA 28 Vct @ 1.46 A 14 V @ 2.50 A
SPW-3636
35VA 36 Vct @ 970 mA 18 V @ 1.94 A
SPW-3637
35VA 48 Vct @ 730 mA 24 V @ 1.46 A
SPW-3638
35VA 56 Vct @ 630 mA 28 V @ 1.26 A
SPW-3639
35VA 120 Vct @ 290mA 60 V @ 580 mA
Drawings Electrical and Dimensional Drawings




Feedback