Shopping Cart 0 Item(s) ($0.00)

Power Transformers -
International Standard Profile PC Mount -
SPW-1000 Series - 2.5 VA

  • Shrouded primaries/three flange bobbin design
  • Bobbin and shroud material rated UL94V0
  • Anchor, insulating and crossover tapes, and shrouded primaries
  • No electrostatic shield required
  • Two distinct, separate windings for each primary and secondary assure excellent HIPOT capability between these windings
  • 4500 VRMS Hipot Pri - Sec
  • Immersed in 100% solids epoxy resin to withstand most aqueous and solvent cleaning systems
  • 100% Final Tested

  • Every single transformer is tested on automated panels for induced voltage (shorted turns), exciting current, open circuit voltage (turns ratio), polarity (phasing) and dielectric strength.
  • Class B Insulation System
115/230V Dual Primaries 50/60hz
Product Name VA Series Parallel
2.5VA 10 V CT @ 250 mA 5 V @ 500 mA
2.5VA 12.6 V CT @ 200 mA 6.3 V @ 400 mA
2.5VA 16 V CT @ 150 mA 8 V @ 300 mA
2.5VA 20 V CT @ 120 mA 10 V @ 240 mA
2.5VA 24 V CT @ 100 mA 12 V @ 200 mA
2.5VA 28 V CT @ 90 mA 14 V @ 180 mA
2.5VA 36 V CT @ 70 mA 18 V @ 140 mA




Feedback