Shopping Cart 0 Item(s) ($0.00)

Power Transformers -
Instrumentation and HVAC Applications - Low Profile PC Mount -
SLP-24-050 Series - 2.5 VA

  • Three flange bobbin design
  • No electrostatic shield required
  • Pin-out compatible with Domestic 115V SPW Series
  • 1500 VRMS Hipot Pri - Sec
  • Immersed in 100% solids epoxy resin to withstand most aqueous and solvent cleaning systems
  • 100% Final Tested

  • Every single transformer is tested on automated panels for induced voltage (shorted turns), exciting current, open circuit voltage (turns ratio), polarity (phasing) and dielectric strength.
  • Class B Insulation System
  • Note: Dual winding primary units on this page have two (2) 24 V primaries that must be connected in parallel for a 24 V input

24V Dual Primaries
Product Name VA Series Parallel
2.5VA 10 V CT @ 250 mA 5 V @ 500 mA
2.5VA 12.6 V CT @ 200 mA 6.3 V @ 400 mA
2.5VA 16 V CT @ 150 mA 8 V @ 300 mA
2.5VA 20 V CT @ 125 mA 10 V @ 250 mA
2.5VA 24 V CT @ 100 mA 12 V @ 200 mA
2.5VA 30 V CT @ 85 mA 15 V @ 170 mA




Feedback